Grading Buckets

Whether you are looking for a standard grading bucket, a tilting grading bucket or a tilt-rotator grading bucket, you have come to the right place. JST offers a huge range of grading buckets for loaders from 1200 kg – 20,500 kg and for excavators with an operating weight from 800 kg to 90 tonnes. Our grading buckets for excavators are from Nordic Line, which is made from high-strength steel that is both lighter and stronger.

Click below to see prices and sizes (width and capacity) in our catalogue.

If you want a customised design, please contact us. We have many years of experience in customised buckets.


Grading buckets

JST offers a wide range of grading buckets with different side plate profiles and widths. In the catalogue, you will find grading buckets for excavators with an operating weight of 800 kg – 90 tonnes.

Our grading buckets are available in Nordic Line, which is made of high-strength steel. Click below to see the specifications in our catalogue:

800 kg – 1.4 tonnes | 1.4 – 2 tonnes | 2 – 2.8 tonnes | 2.8 – 4 tonnes | 4 – 6 tonnes | 6 – 9 tonnes | 9 – 12 tonnes | 12 – 16 tonnes | 12 – 16 tonnes | 16 – 20 tonnes | 20 – 25 tonnes | 20 – 25 tonnes | 25 – 32 | 32 – 40 tonnes | 40 – 50 tonnes

Contact us for other sizes.


Tilting grading buckets

Our tilting grading buckets can handle many heavy-duty tasks. On the very large excavators that are used on large road projects, for example, many choose to have the tilting grading bucket mounted directly.

If you have a mini excavator and want to avoid the costly expense of a tilt-rotator, a tilting grading bucket can be a good alternative.

We offer a wide range of tilting grading buckets for excavators with an operating weight of 800 kg – 90 tonnes. Our tilting grading buckets are available with different side plate profiles and in different widths. All buckets are from Nordic Line and made from high-strength steel, which makes the bucket lighter and stronger at the same time.

Specifications:

  • 2×45 degrees tilt angle
  • Heavy-duty, machined tilt system
  • O-rings and hardened shims between the bucket part and bucket ear unit
  • Large contact surfaces between the bucket part and the bucket ear unit
  • Mounted with hydraulic hoses up to the top of the bucket ears, finished with a bulkhead connector.
  • Surface hardened axles
  • See the max hydraulic pressure on specific sizes – see the links below

Click below to see the specifications in our catalogue:

800 kg – 1.4 tonnes | 1.4 – 2 tonnes | 2 – 2.8 tonnes | 2.8 – 4 tonnes | 4 – 6 tonnes | 6 – 9 tonnes | 9 – 12 tonnes | 12 – 16 tonnes | 16 – 20 tonnes | 20 – 25 tonnes | 25 – 32 tonnes | 32 – 40 tonnes | 40 – 50 tonnes | 50 – 60 tonnes

Contact us for other sizes.


Tilt-rotator grading buckets

JST tilt-rotator grading buckets are designed for optimal use with tilt-rotators. The tilt-rotator grading buckets can be found in our Nordic Line, which is made from high-strength steel. They are therefore relatively lightweight, like our other products in the range, but are still extremely robust thanks to the high-strength steel.

The design with bevelled corners, open angle, long and flat bottom and conical design allows the bucket to cut through the material with minimal digging resistance. At the same time, the bevelled corners allow for full utilisation of the tilt-rotator.

We offer a wide range of tilt-rotator grading buckets with different side plate profiles and widths. In our catalogue, you’ll find tilt-rotator grading buckets for excavators with an operating weight of 800 kg – 90 tonnes.

Click below to see the specifications in our catalogue:

800 kg – 1.4 tonnes | 1.4 – 2 tonnes | 2 – 2.8 tonnes | 2.8 – 4 tonnes | 4 – 6 tonnes | 6 – 9 tonnes | 9 – 12 tonnes | 12 – 16 tonnes | 16 – 20 tonnes | 20 – 25 tonnes | 25 – 32 tonnes | 32 – 40 tonnes | 40 – 50 tonnes

Contact us for other sizes.


Grader buckets for loaders

For loaders with an operating weight of 1200 – 8500 kg, we offer grading buckets in widths from 130 – 260 cm.

Click below to see the specifications in our catalogue:


For loaders with an operating weight of 8500 – 20,500 kg, we offer grading buckets in three different variants depending on the operating weight, with widths from 250 – 320 cm.

Click below to see prices, etc., in our catalogue